Need assistance? We’re here to help! If you have questions about products, parts, shipping, or order processing, our knowledgeable team is ready to assist you at (205) 926-9606.
14 products
14 products
Sort by:
Bush Hog
$1,759.00
Unit price per$1,759.00
Unit price perAugers… the heart of the digger Whether you need to drill holes for posts, tree plantings, structural support members or other tasks, Bush Hog® has a post hole digger to meet your needs. Our three 2400 Series models fit both Cat. 1 and Cat. 2 tractors. Augers are offered in both standard and heavy duty versions in sizes from 6 inches to 24 inches depending on digger model. Tough soil penetration is no problem for the powerful Bush Hog® post hole diggers.
PERFORMANCE FEATURES
Heavy duty augers equipped with double flighting for more cutting surfaces and faster digging Special alloy pinion gears and tapered roller bearings on both sides of each gear CONSTRUCTION FEATURES 2400 Series model fits both Cat. 1 and Cat. 2 tractors Offered in both regular duty and heavy duty augers in sizes from 6-inch to 12-inch Rugged gearbox construction Shear pin driveline protection Options include Hydraulic Down Force Kit, Parking Stand, and Auger Extensions
PRODUCT FEATURES
BH pHDauger — 2†Round hub connection — Replaceable drill teeth — Heavy duty augers equipped with double flighting for more cutting surfaces and faster, easier digging—especially in heavier soils PHD gearbox — Rugged gearbox construction — Special alloy pinion gears and tapered roller bearings on both sides of each gear — Shear pin driveline protection
SPECIFICATION
PHD2401 AUGER LENGTH 42-INCH RD/48-INCH HD AUGER DIAMETER 6-INCH, 9 INCH OR 12 INCH, REG. DUTY AND HEAVY DUTY AUGER RPM 180 TYPE HITCH CAT. I AND II INPUT RPM 540 GEAR RATIO 3.00:1 OUTPUT SHAFT 2-INCH DIAMETER DRIVESHAFT ASAE CAT. I HITCH YOKE 2 7/8-INCH TUBING BOOM 2 7/8-INCH TUBING COMPONENT PROTECTION SHEAR BOLT OPTIONS (ALL MODELS) HYDRAULIC DOWN FORCE KIT / PARKING STAND / AUGER EXTENSIONS.
$3,315.00
Unit price per$3,315.00
Unit price per2022 Bush Hog® RTG And GR Series RT60G
The gear-driven "ROTO HOG" by Bush Hog® are built Bush Hog® tough for years of dependable service. Available in standard or reverse till, there is a model that will fit your application. In ground cover conditions, a reverse till model works best because the flow of material tends to cover the chopped groundcover for quicker decomposition. The standard six blades per flange on every model gives the maximum breakup of soil even in hard or packed conditions. The heavy duty gear drive alleviates worries about the durability of a chain drive in the same tough conditions. The "ROTO HOG" is the perfect tool for landscape work, seed beds, or any other application that requires that the soil be pulverized.
Features may include:
Performance
- 60 to 82 1/2-inch models available
- Gear Driven drive train, available with Reverse Till
- The standard six blades per flange gives the maximum breakup of soil even in hard or packed conditions.
- Maximum Tilling Depth 7 1/2-inches (requires multiple passes)
- ASAE Cat 1, Standard and Quick Hitch
- Available in Red, Orange, Blue and Green
Product
- RT60GR Rotary Tiller, 60-inches Model, Gear Drive, Reverse Till
- Gear drive with oil bath in side gearbox is more durable than a chain drive that will wear and could break.
$4,220.00
Unit price per$4,220.00
Unit price perThe BH310-2 Series picks up where the BH210-2 Series trails off. Built with similar (but heavier-duty) design features as the BH210-2 Series, the BH310-2 Series has larger gearboxes, stronger decks, full-length strongbacks, reinforced rear sideband area, thicker sidebands and hitch structure.
Heavy grass, weeds, and medium-sized brush and saplings don't stand a chance against these authentic Bush Hog® built cutters.
Available in 5-foot, 6-foot, and 7-foot cutting widths, the BH310 Series Rotary Cutters are designed to deliver superior performance in tough conditions, day after day, year after year. Remember, If it doesn't say Bush Hog®, it just won't cut it.
$3,720.00
Unit price per$3,720.00
Unit price perThe gear driven "ROTO HOG" by Bush Hog are built Bush Hog tough for years of dependable service. Available in standard or reverse till, there is a model that will fit your application. In ground cover conditions, a reverse till model works best because the flow of material tends to cover the chopped groundcover for quicker decomposition. The standard six blades per flange on every model gives the maximum breakup of soil even in hard or packed conditions. The heavy duty gear drive alleviates worries about the durability of a chain drive in the same tough conditions. The "ROTO HOG" is the perfect tool for landscape work, seed beds, or any other application that requires that the soil be pulverized.
Features
Performance Features
- 60 to 82 1/2-inch models available
- Gear Driven drive train, available with Reverse Till
- The standard six blades per flange gives the maximum breakup of soil even in hard or packed conditions.
- Maximum Tilling Depth 7 1/2-inches (requires multiple passes)
- ASAE Cat 1, Standard and Quick Hitch
- Available in Red, Orange, Blue and Green
Product Features
- RT72GR Rotary Tiller, 60-inches Model, Gear Drive, Reverse Till
- Gear drive with oil bath in side gearbox is more durable than a chain drive that will wear and could break.
$3,765.00
Unit price per$3,765.00
Unit price perBuilding on the success of the original BH210 Series, the New, Updated BH210-2 Series Rotary Cutters combine the legacy and reputation of Bush Hog's Single-Spindles with new, innovative design updates. These updated cutters now have full-length strongbacks designed to reinforce the entire length of the cutter, front to back, especially enhancing the rear half of the cutter and tailwheel structure. Reinforcement plates have been added to the bottom of the rear sidebands, providing extra strength in this critical area when backing into vegetation. Tall grass, pesky weeds, and small brush are no match for these authentic Bush Hog® built cutters. The BH210-2 Series Rotary Cutters are Made in America and designed to deliver superior performance in tough conditions, day after day, and year after year. Remember, "If it doesn't say Bush Hog, it just won't cut it."
PERFORMANCE FEATURES
- 72 inches Cutting Width
- Quick-Hitch Ready
- Gearbox Ratings of 65 HP
- Taller Sidebands for increased Cutting Volume and Efficiency
- Smooth-Top Deck for easy cleaning
- Custom Forged, 4" Wide Heat-Treated Blades
CONSTRUCTION FEATURES
- Continuously Welded Deck
- Full-Length 10ga Strongbacks
- Reinforcing plates added to rear sidebands
- Double-Braced Lower Hitch Lugs
- Formed and Fully-Welded Tailwheel Mount
- Puncture-Proof Laminated Tailwheels
SAFETY FEATURES
- PTO Shield
- Front Deflector
- Rear Metal Band
- Front Chains
- Rear Chains
SPECIFICATIONS
- Cutting Width: 72"
- Cutting Height: 2"-12"
- Cutting Capacity: 2"
- Hitch Type: Cat 1 Std & QH Ready; Cat 2 Std Compatible With Optional Bushings
- Deck Thickness: 10GA
- Sideband Thickness: 10GA
- Sideband Height: 11 1/2"
- Driveline: Cat 3
- Driveline Protection: 2-Plate Slip-clutch
- Gearbox: 65 HP
- Tractor PTO Speed: 540 RPM
- Minimum Tractor PTO HP: 30 HP
- Blade Holder: Oval
- Blades: 1/2" X 4" Uplift
- Blade Tip Speed: 14,963 fpm
- Tires: 15 1/2" Laminated
- Deflector Type: Rubber/Metal/Chains
- Approximate Weight: 840 lb.
$3,098.00
Unit price per$3,098.00
Unit price perDESCRIPTION
Bush Hog® BH115 56 in. Deck, Single-Spindle Rotary Cutter.
The New BH110 Series picks up where the popular Razorback Series left off. Bush Hog®'s legendary durability and reliability is enhanced even further in the new light-duty BH110 Series. We've taken our quality to a new level in the BH110 Series by robotically welding the entire cutter. All welding is performed on the underside of the deck giving these cutters a clean, sleek appearance. All welds are applied at the same temperature, angle, and duration to ensure consistency from start to finish. Additional enhancements include a stronger gearbox stand & tailwheel caster fork, optional front chain shielding, and optional Cat. 1 Quick Hitch. The economically priced BH110 Series allows customers with lower horsepower compact tractors to take control of pesky weeds, grass, and small brush up to 1" in diameter while experiencing legendary Bush Hog® performance. As thousands of satisfied customers can attest, if it doesn't say Bush Hog®, it just won't cut it!
PERFORMANCE FEATURES
- Cutting Width of 56 inches
- 60 HP Gearbox Rating
- 2-11 inch Cutting Height
CONSTRUCTION FEATURES
- Tough 12 Gauge Deck Thickness
- Durable Laminated Tailwheels
- Cat. 1 3-Point Hitch
- Quick Hitch Compatible
- Available in Red, Orange, Blue, and Green
SAFETY FEATURES
- Front Rubber Belt
- Rear Metal Band
- Optional Front Chains
SPECIFICATIONS
- Cutting Width: 56"
- Cutting Height: 2"-11"
- Cutting Capacity: 1"
- Hitch Type: Cat 1 Std & QH compatible
- Deck Thickness: 12GA
- Sideband Thickness: 10GA
- Sideband Height: 8"
- Driveline: CAT 3
- Driveline Protection: Shearpin or Slip-Clutch
- Gearbox: 60 HP
- Tractor PTO Speed: 540 RPM
- Minimum Tractor PTO HP: 20 HP
- Blade Holder: Wing Pan
- Blades: 1/2" X 3" Uplift
- Blade Tip Speed: 15,472 fpm
- Tires: 14 1/2" Laminated
- Deflector Type: Front belt/Rear metal band standard; Front chains optional
- Approximate Weight: 500 lb.
$6,994.00
Unit price per$6,994.00
Unit price perPERFORMANCE FEATURES
- Reliable Bush Hog Performance In An Economical 3-Point Lift-Type Mower
- 7’2″ Cutting Width
- Durable Rubber Discs in Cross Shafts
- 7 Gauge Oval Blade Pans
- EZ-Clean Smooth, Sloped Deck
- Cat. 1 & 2 Standard & Quick Hitch
- High Blade Tip Speed
- 10-Year Gearbox Limited Warranty
CONSTRUCTION FEATURES
- Robust Lift Hitch Components
- 10-Gauge Deck Plate
- 7-Gauge x 11 3/4″-inches Sidebands
- Single or Dual 15 1/2″ Tailwheels
- Reinforced Deck Sub-Structure
- Strong 7-Gauge Skids
- Durable Powder Coat Paint
SAFETY FEATURES
- Rear Metal Band or Single or Double Row Chains
- Input PTO Shield
- Easy-Access Cross-Shaft Shields
$2,236.00
Unit price per$2,236.00
Unit price perDESCRIPTION
Bush Hog® BH115 56 in. Deck, Single-Spindle Rotary Cutter.
The New Bush Hog® BH115, with a 56 inch deck, Single-Spindle Rotary Cutter picks up where the Razorback Series left off. Bush Hog®'s legendary durability and reliability is enhanced even further in the new light-duty BH100 Series. We've taken our quality to a new level by robotically welding the entire cutter. All welding is performed on the underside of the deck giving these cutters a clean, sleek appearance. All welds are applied at the same temperature, angle, and duration to ensure consistency from start to finish. Additional enhancements include a stronger gearbox stand & tailwheel caster fork, optional front chain shielding, and optional Cat. 1 Quick Hitch. The economically priced BH100 Series allows customers with lower horsepower compact tractors to take control of pesky weeds, grass, and small brush up to 1" in diameter while experiencing legendary Bush Hog® performance. As thousands of satisfied customers can attest, if it doesn't say Bush Hog®, it just won't cut it!
PERFORMANCE FEATURES
- Cutting Width of 56 inches
- 60 HP Gearbox Rating
- 2-11 inch Cutting Height
CONSTRUCTION FEATURES
- Tough 12 Gauge Deck Thickness
- Durable Laminated Tailwheels
- Cat. 1 3-Point Hitch
- Quick Hitch Compatible
- Available in Red, Orange, Blue, and Green
SAFETY FEATURES
- Front Rubber Belt
- Rear Metal Band
- Optional Front Chains
SPECIFICATIONS
- Cutting Width: 56"
- Cutting Height: 2"-11"
- Cutting Capacity: 1"
- Hitch Type: Cat 1 Std & QH compatible
- Deck Thickness: 12GA
- Sideband Thickness: 10GA
- Sideband Height: 8"
- Driveline: CAT 3
- Driveline Protection: Shearpin or Slip-Clutch
- Gearbox: 60 HP
- Tractor PTO Speed: 540 RPM
- Minimum Tractor PTO HP: 20 HP
- Blade Holder: Wing Pan
- Blades: 1/2" X 3" Uplift
- Blade Tip Speed: 15,472 fpm
- Tires: 14 1/2" Laminated
- Deflector Type: Front belt/Rear metal band standard; Front chains optional
- Approximate Weight: 500 lb.
- Gearbox Warranty: 10 Years
$2,545.00
Unit price per$2,545.00
Unit price perDESCRIPTION
Bush Hog® BH116 68 in. Deck, Single-Spindle Rotary Cutter.
The New Bush Hog® BH116, with a 68 inch deck, Single-Spindle Rotary Cutter picks up where the Razorback Series left off. Bush Hog®'s legendary durability and reliability is enhanced even further in the new light-duty BH100 Series. We've taken our quality to a new level by robotically welding the entire cutter. All welding is performed on the underside of the deck giving these cutters a clean, sleek appearance. All welds are applied at the same temperature, angle, and duration to ensure consistency from start to finish. Additional enhancements include a stronger gearbox stand & tailwheel caster fork, optional front chain shielding, and optional Cat. 1 Quick Hitch. The economically priced BH100 Series allows customers with lower horsepower compact tractors to take control of pesky weeds, grass, and small brush up to 1" in diameter while experiencing legendary Bush Hog® performance. As thousands of satisfied customers can attest, if it doesn't say Bush Hog®, it just won't cut it!
PERFORMANCE FEATURES
- Cutting Widths of 68 inches
- 60 HP Gearbox Rating
- 2-11 inch Cutting Height
CONSTRUCTION FEATURES
- Tough 12 Gauge Deck Thickness
- Durable Laminated Tailwheels
- Cat. 1 3-Point Hitch
- Quick Hitch Compatible
- Available in Red, Orange, Blue, and Green
SAFETY FEATURES
- Front Rubber Belt
- Rear Metal Band
- Optional Front Chains
SPECIFICATIONS
- Cutting Width: 68"
- Cutting Height: 2"-11"
- Cutting Capacity: 1"
- Hitch Type: Cat 1 Std & QH compatible
- Deck Thickness: 12GA
- Sideband Thickness: 10GA
- Sideband Height: 8"
- Driveline: CAT 3
- Driveline Protection: Shear pin or Slip-clutch
- Gearbox: 60 HP
- Tractor PTO Speed: 540 RPM
- Minimum Tractor PTO HP: 25 HP
- Blade Holder: Wing Pan
- Blades: 1/2" X 3" Uplift
- Blade Tip Speed: 14,307 fpm
- Tires: 14 1/2" Laminated
- Deflector Type: Front belt/Rear metal band standard; Front chains optional
- Approximate Weight: 600 lb.
- Gearbox Warranty: 10 Years
$1,315.00
Unit price per$1,315.00
Unit price perCompact Road GradersMore tools to handle the landscaping chores of homeowners and compact tractor owners! Bush Hog now offers a light-duty, compact road graders that expand the work capabilities of your small, compact and subcompact tractors. Bush Hog is committed to providing you more reasons to get out of the house and go to work. The dirt around your house or workplace better look out! Things are going to be moving!
Compact Road Graders
More tools to handle the landscaping chores of homeowners and compact tractor owners”¦ Bush Hog now offers a light-duty, compact road graders that expand the work capabilities of your small, compact and subcompact tractors. Bush Hog is committed to providing you more reasons to get out of the house and go to work. The dirt around your house or workplace better look out”¦ things are going to be moving!
Features include:
Performance
- Adjustable and replaceable skid shoes
- 3/16 thick side panels
- Bolt on, replaceable and reversible blades
- Heat-treated Steel Blades
Specs
-
Bush Hog®
- Compact Road Graders
- CRG48
- Graders/Grading Scrapers
- 2WD (Max): 24 HP | FWA (Max): 20 HP
- 48"
- 238 lbs
- Two 3/8" x 6" bolt-on, replaceable and reversible heat-treated blades
- Cat. 1 Std. and QH
$1,120.00
Unit price per$1,120.00
Unit price perBush Hog CBX48
Features may include: Performance 48 and 60 inch working widths12 inch box depth for both models5/8 inch x 2 1/2 inch scarifier size4 and 5 scarifier teeth2 blades with reversible cutting edge for both modelsFor maximum of 24 PTO tractor HPQuick hitch compatibilityLower hitch position for smaller.
PERFORMANCE FEATURES
- 48 and 60 inch working widths
- 12 inch box depth for both models
- 5/8 inch x 2 1/2 inch scarifier size
- 4 and 5 scarifier teeth
- 2 blades with reversible cutting edge for both models
- For maximum of 24 PTO tractor HP
- Quick hitch compatibility
- Lower hitch position for smaller tractors
CONSTRUCTION FEATURES
- Heavy Duty A Frame
- Reversible Cutting Edge
- Powder Coat Paint
SPECIFICATIONS
MODELS
CBX48
CBX60
WORKING WIDTH
48 INCHES
60 INCHES
BOX DEPTH
12 INCHES
12 INCHES
SIDE END PLATE THICKNESS
3/16 INCHES
3/16 INCHES
SCARIFIER SIZE
5/8 INCHES X 2 1/2 INCHES
5/8 INCHES X 2 1/2 INCHES
NUMBER OF SCARIFIER TEETH
4 TEETH
5 TEETH
TYPE HITCH
ASAE CAT. I/QH
ASAE CAT. I/QH
CUTTING EDGE
REVERSIBLE
REVERSIBLE
NUMBER OF CUTTING EDGES
2 BLADES, BOLT ON REVERSIBLE CUTTING EDGE
2 BLADES, BOLT ON REVERSIBLE CUTTING EDGE
MAXIMUM TRACTOR HP
24 PTO
24 PTO
APPROXIMATE WEIGHT
248 LBS
258 LBS
WARRANTY
1 YEAR LIMITED WARRANTY
FEATURES
AVAILABLE IN MAJOR TRACTOR COLORS
$2,040.00
Unit price per$2,040.00
Unit price perDESCRIPTION
Bush Hog RG60 Road Grader.
Bush Hog Road Grader Blades fit a wide range of tractors. The Heavy-Duty, CAT I three-point hitch, 4 in. x 4 in. mainframe and double-lug lower hitch points help ensure performance and reliability. Shearing action of the material being worked is provided by two, reversible, high carbon steel cutting edges. One edge mounted inside the box and the other mounted on the back side allow the blade to be operated in forward or reverse. Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.
KEY FEATURES
- The Heavy-Duty, CAT I three-point hitch with 4 in. x 4 in. mainframe and double-lug lower hitch points.
- High quality Welds for Long lasting durability.
- Two, reversible, high carbon steel cutting edges. Skid Shoe Construction: 3/8 in. x 2-1/2 in. x 46-3/4 in. long.
PERFORMANCE FEATURES
- The Heavy-Duty, CAT I three-point hitch with a 4 in. x 4 in. mainframe and double-lug lower hitch points.
- Two, reversible, high carbon steel cutting edges. One inside and the mounted on the back side allow the blade to be operated in forward or reverse.
- Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.
SPECIFICATIONS
- Hitch: Cat. 1 Std and QH
- Working Width: 60"
- Weight: 500 lbs
- Side Panel Thickness: 3/16"
- Front Main Beam Construction: 4" X 4" X 5/16" Wall
- Rear Beam Construction: 2-1/2" X 2-1/2" X 3/16" Wall
- Skid Shoe Construction: 3/8" X 2-1/2" X 46-3/4" Long
- Scarifier Shanks: Three Position Shanks With Dimpled-on Hardened Tips
- Number of Scarifier Shanks: 4
- Cutting Edges: Two 1/2" X 6" Bolt-on, Replaceable and Reversible Heat-treated Blades
$2,210.00
Unit price per$2,210.00
Unit price perDESCRIPTION
Bush Hog RG72 Road Grader.
Bush Hog Road Grader Blades fit a wide range of tractors. The Heavy-Duty, CAT I three-point hitch, 4 in. x 4 in. mainframe and double-lug lower hitch points help ensure performance and reliability. Shearing action of the material being worked is provided by two, reversible, high carbon steel cutting edges. One edge mounted inside the box and the other mounted on the back side allow the blade to be operated in forward or reverse. Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.
KEY FEATURES
- The Heavy-Duty, CAT I three-point hitch with 4 in. x 4 in. mainframe and double-lug lower hitch points.
- High quality Welds for Long lasting durability.
- Two, reversible, high carbon steel cutting edges. Skid Shoe Construction: 3/8 in. x 2-1/2 in. x 46-3/4 in. long.
PERFORMANCE FEATURES
- The Heavy-Duty, CAT I three-point hitch with a 4 in. x 4 in. mainframe and double-lug lower hitch points.
- Two, reversible, high carbon steel cutting edges. One inside and the mounted on the back side allow the blade to be operated in forward or reverse.
- Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.
SPECIFICATIONS
- Hitch: Cat. 1 Std and QH
- Working Width: 72"
- Weight: 571 lbs
- Side Panel Thickness: 3/16"
- Front Main Beam Construction: 4" X 4" X 5/16" Wall
- Rear Beam Construction: 2-1/2" X 2-1/2" X 3/16" Wall
- Skid Shoe Construction: 3/8" X 2-1/2" X 46-3/4" Long
- Scarifier Shanks: Three Position Shanks With Dimpled-on Hardened Tips
- Number of Scarifier Shanks: 6
- Cutting Edges: Two 1/2" X 6" Bolt-on, Replaceable and Reversible Heat-treated Blades
$2,415.00
Unit price per$2,415.00
Unit price per- Features Bush Hog Road Grader Blades fit a wide range of tractors. The Heavy-Duty, CAT I three-point hitch, 4 in. x 4 in. mainframe and double-lug lower hitch points help ensure performance and reliability. Shearing action of the material being worked is provided by two, reversible, high carbon steel cutting edges. One edge mounted inside the box and the other mounted on the back side allow the blade to be operated in forward or reverse. Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.
- Features may include: Performance The Heavy-Duty, CAT I three-point hitch 4 in. x 4 in. mainframe and double-lug lower hitch points Two, reversible, high carbon steel cutting edges. One inside and the mounted on the back side allow the blade to be operated in forward or reverse.
- Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in. Product The Heavy-Duty, CAT I three-point hitch with 4 in. x 4 in. mainframe and double-lug lower hitch points Two, reversible, high carbon steel cutting edges. Skid Shoe Construction: 3/8 in. x 2-1/2 in. x 46-3/4 in. long High quality Welds for Long lasting durability Specs Key Features 2019 Bush Hog RG Series RG84 Year2019 Manufacturer Bush Hog Model Name RG Series Trim NameRG84 Generic Type (Primary)Graders/Grading Scrapers PTO Required PTO Type Max (2WD.): 50 HP |Assist Max (FWA): 40 HP ChassisSkid Shoes: 3/8 in. x 2-1/2 in. x 46-3/4 in. long Beam4 in. x 4 in. x 5/16†wall | Rear Beam: 2-1/2 in. x 2-1/2 in. x 3/16 in. wall Hitch/TypeCat. 1 Std and QH Sidewalls3/16" Dimensions Width, Working Position84 in. Weights Weight642 lbs Features Cutting Edge TypeTwo 1/2 in. x 6 in. bolt-on, replaceable and reversible heat-treated blades Shank TypeScarifier: Three position shanks with dimpled-on hardened tips Scarifying Teeth Quantity.