Products

Engine power 48 hp

Hitch lift capacity 3306 lb

High performance meets efficiency in this highly customizable Series 3 tractor that has the power to support your productivity.

Promoting thriving crop in your acreage

With powerful lift capabilities in a compact body, a TYM compact tractor enables you to perform tasks within the narrow spaces between garden beds. Save time and labor to realize your vision quickly and efficiently, from tilling and leveling the land to scattering soil and seed treatment, you can grow your own orchard or raise vegetable and fruit beds within your estate. With the option of shorter variations, you can find a sub-compact tractor to support smaller greenhouse operations.

One of the strongest and toughest tractors in its horsepower range, this customizable tractor delivers power and dependability in its compact frame. The 48 HP 4-cycle engine matched with a 4-range Hydro-Max HST or Synchro-Shuttle transmission can drive a range of implements to do everything from digging up rocks to hauling them off-site.

Heavy-duty 3-point hitch and stabilizers make the tractor a powerful partner on the field or on-site, while the high-capacity front-end loader attachment boosts productivity by helping you move more at once. The 2-speed independent PTO allows you to operate attachments with greater fuel efficiency and without compromising productivity.

Powerful features to drive tractor performance

With a powerful hydraulic system and ergonomic controls, this Series 3 tractor has the capability to complete a variety of jobs, whether big or small. The comfortable driver’s seat is equipped with ergonomically designed controls to give operators every advantage.

Â

• Battery pole saw for professionals with long 4m reach and performance that surpasses petrol equivalents. Maximum performance and durability with low weight, excellent ergonomics and quiet operation for use in any location at any time of day.
  
  

• Engine	Fixed pole saw 10" 3/8" US/CA, No Battery/Charger SKU: 967 88 46-11
  Oil tank volume	0.32 US pint
  Motor type	BLDC (brushless)
  Battery
  Battery type	Li-Ion
  Battery voltage	36 V
  Equipment
  Pitch	3/8"
  Recommended bar length, max	12 in
  Recommended bar length, min	10 in
  Bar length (inch)	10 in
  Chain type	H37
  Battery	Not included
  Battery charger	Not included
  Dimensions
  Weight (excl. battery and cutting equipment)	7.5 lbs
  Full length, including cutting equipment	94.488
  Sound and noise
  Sound pressure level at operators ear	88 dB(A)
  Sound power level, guaranteed (LWA)	98 dB(A)
  Sound power level, measured	98 dB(A)
  Vibration
  Equivalent vibration level (ahv, eq) rear handle	1.1 m/s²

DESCRIPTION PRO 26 (15.5 HP) Our 15.5 HP PRO 26 has 40% more power than the 10.5 HP model, and adds electric-starting, a full pressure oil pump for better mowing on slopes, more brush-busting capacity (including saplings up to 2.5" thick), and Power Steering.

CUTTING
Cutting Capacity: 4' High Grass 8' High Weeds 2.5" Thick Saplings Cutting Height: 3.5" Cutting Width: 26" Number of Blades: 1

DIMENSIONS
Handlebar Height:
High: 42"
Low: 38" Height: 48.2"
Length: 80.5"
Shipping Weight: 396 lbs 
Weight: 290 lbs
Width: 32.5"
Blade Length: 26"
Shipping Dimensions: 62"L x 46"W x 50"H
ENGINE Air Filter: Dual-Element
Cooling Methods: Air Cooled
Displacement: 481cc
Engine Type: Briggs & Stratton Intek OHV
Horsepower: 15.5
Lubrication: Full Pressure Pump w/Oil Filter
Make: Briggs & Stratton
Number Of Cylinders: 1 (Cast-Iron Sleeved)
Oil Capacity: 56oz
Oil Filter: Yes
Oil Type: SAE 30W HD
Pre Cleaner: Yes
Starting Type: Electric
Choke/Primer: Choke

FUEL SYSTEM
Fuel Capacity: 2 Gallon Fuel Shutoff Valve: Yes Inline Fuel Filter: Yes

GENERAL
Accepts Attachments: Yes CARB Certified: Yes Assembly: Yes

WHEELS TIRES
Dimensions: 18" x 6.5" x 8" Number of Tires: 2 Tread: Lugged Wheel Brake with Lock: No

WARRANTY
Engine Warranty: 2 yrs Residential Use ,1 yr Commercial use Machine Warranty: 2 yrs Residential Use, 90 Days Commercial Use

MATERIAL
Deck: 12 Gauge, Pivotable Frame: 12 Gauge

FEATURES
Power Steering is Easy on You!: Our disc brake system provides Power Steering. Each wheel is equipped with its own brake, operated by a hand lever. Just squeeze the brake on one side, and the mower will pivot easily around that wheel. You're in control...without wrestling the machine!

15.5 HP Briggs & Stratton Intek Engine: The legendary power, performance and durability of Briggs & Stratton® engines make them the obvious choice for our Walk-Behind Field and Brush Mowers. With the PRO 26 15.5 HP model, you step up to a Briggs Intek Series OHV engine, with full-pressure oil pump (great for positive lubrication even on side slopes), spin-off oil filter, 481 cc of displacement, cast-iron cylinder sleeve, and easy, turn-key electric-starting.

Assembled in the USA: Assembled in the USA using foreign and domestic parts. Ships direct from our Wisconsin factory.

26" Pivoting Deck: The 26" deck is wide enough for effective clearing, but is still very maneuverable. Unlike rigid, fixed decks found on some mowers, the DR deck pivots from side to side, allowing it to follow the contours of rough terrain. This feature minimizes scalping and improves traction.

Superior Mulching: Our decks are enclosed on 3 sides, so that cut material is chopped and re-chopped, reducing grass and brush to a fine mulch. This means less material is left behind in your field, and none of the windrows you get with side-discharging mowers.

Gear-Driven Transmission: Lock it in and Rip it up!: Unlike hydrostatic drives, the DR's geared transmission lets you lock in your ground speed, leaving your hands free to steer the machine across uneven terrain (instead of fussing with touchy throttle controls as you go). With 3 forward gears, you can choose a fixed pace that's right for you.

Big, Lugged Tires for Sure Traction: No other brush mower has tires like this. They're the biggest (18" x 6.5" x 8"), they have superior lugged treads that pull the mower through or over just about anything, and they are sealant filled...which means they're highly resistant to puncture. Tough as nails, apparently!

Custom-Made Blade Spindle: Made of 1.375" thick cast iron with oversized double sealed bearings, the blade spindle is integrated into the deck housing and reinforced for vibration-free performance. Designed to provide years of maintenance-free use (and abuse!).

Commercial Grade Electric Clutch: Our industry-leading, self-adjusting clutch is designed for easy access and quick swapping out of optional attachments. After 245 hours of testing we only used up 10% of the life of the clutch. There are no cables to stretch or idler pulleys to get out of adjustment. Attachments Add 4-Season Versatility:

Thanks to our quick-change coupling system, the DR's brush mowing deck can be swapped–in just minutes–with one of our optional PTO attachments: a 42" finish mower, a 30" snow thrower, a wood chipper, or a 42" grader blade. It's like owning 5 machines in one!

Built to Take a Beating: Field and brush mowing is a bruising business, and underbuilt mowers don't survive long out where the tough stuff grows. We frame our machines with heavy-duty, laser cut steel, and reinforce key stress spots so you get a product that will withstand years of use and abuse.

Adjustable Handlebars: A comfortable working height is important, especially when traversing rough terrain.

Ergonomic Controls: Both on the control panel and on the grips, all DR Field and Brush Mowers controls are designed to optimize operator comfort and minimize hand fatigue. Everything you need is right at your fingertips, so there is no walking around the mower to make adjustments.

Heavy-Duty Powder Coating: Our frames and decks are finished with a tough, durable powder coating that resists scratching and promotes long life.

DESCRIPTION

Bush Hog® BH115 56 in. Deck, Single-Spindle Rotary Cutter.

The New Bush Hog® BH115, with a 56 inch deck, Single-Spindle Rotary Cutter picks up where the Razorback Series left off. Bush Hog®'s legendary durability and reliability is enhanced even further in the new light-duty BH100 Series. We've taken our quality to a new level by robotically welding the entire cutter. All welding is performed on the underside of the deck giving these cutters a clean, sleek appearance. All welds are applied at the same temperature, angle, and duration to ensure consistency from start to finish. Additional enhancements include a stronger gearbox stand & tailwheel caster fork, optional front chain shielding, and optional Cat. 1 Quick Hitch. The economically priced BH100 Series allows customers with lower horsepower compact tractors to take control of pesky weeds, grass, and small brush up to 1" in diameter while experiencing legendary Bush Hog® performance. As thousands of satisfied customers can attest, if it doesn't say Bush Hog®, it just won't cut it!

PERFORMANCE FEATURES

• Cutting Width of 56 inches
• 60 HP Gearbox Rating
• 2-11 inch Cutting Height

CONSTRUCTION FEATURES

• Tough 12 Gauge Deck Thickness
• Durable Laminated Tailwheels
• Cat. 1 3-Point Hitch
• Quick Hitch Compatible
• Available in Red, Orange, Blue, and Green

SAFETY FEATURES

• Front Rubber Belt
• Rear Metal Band
• Optional Front Chains

SPECIFICATIONS

• Cutting Width: 56"
• Cutting Height: 2"-11"
• Cutting Capacity: 1"
• Hitch Type: Cat 1 Std & QH compatible
• Deck Thickness: 12GA
• Sideband Thickness: 10GA
• Sideband Height: 8"
• Driveline: CAT 3
• Driveline Protection: Shearpin or Slip-Clutch
• Gearbox: 60 HP
• Tractor PTO Speed: 540 RPM
• Minimum Tractor PTO HP: 20 HP
• Blade Holder: Wing Pan
• Blades: 1/2" X 3" Uplift
• Blade Tip Speed: 15,472 fpm
• Tires: 14 1/2" Laminated
• Deflector Type: Front belt/Rear metal band standard; Front chains optional
• Approximate Weight: 500 lb.
• Gearbox Warranty: 10 Years

DESCRIPTION

Bush Hog® BH116 68 in. Deck, Single-Spindle Rotary Cutter.

The New Bush Hog® BH116, with a 68 inch deck, Single-Spindle Rotary Cutter picks up where the Razorback Series left off. Bush Hog®'s legendary durability and reliability is enhanced even further in the new light-duty BH100 Series. We've taken our quality to a new level by robotically welding the entire cutter. All welding is performed on the underside of the deck giving these cutters a clean, sleek appearance. All welds are applied at the same temperature, angle, and duration to ensure consistency from start to finish. Additional enhancements include a stronger gearbox stand & tailwheel caster fork, optional front chain shielding, and optional Cat. 1 Quick Hitch. The economically priced BH100 Series allows customers with lower horsepower compact tractors to take control of pesky weeds, grass, and small brush up to 1" in diameter while experiencing legendary Bush Hog® performance. As thousands of satisfied customers can attest, if it doesn't say Bush Hog®, it just won't cut it!

PERFORMANCE FEATURES

• Cutting Widths of 68 inches
• 60 HP Gearbox Rating
• 2-11 inch Cutting Height

CONSTRUCTION FEATURES

• Tough 12 Gauge Deck Thickness
• Durable Laminated Tailwheels
• Cat. 1 3-Point Hitch
• Quick Hitch Compatible
• Available in Red, Orange, Blue, and Green

SAFETY FEATURES

• Front Rubber Belt
• Rear Metal Band
• Optional Front Chains

SPECIFICATIONS

• Cutting Width: 68"
• Cutting Height: 2"-11"
• Cutting Capacity: 1"
• Hitch Type: Cat 1 Std & QH compatible
• Deck Thickness: 12GA
• Sideband Thickness: 10GA
• Sideband Height: 8"
• Driveline: CAT 3
• Driveline Protection: Shear pin or Slip-clutch
• Gearbox: 60 HP
• Tractor PTO Speed: 540 RPM
• Minimum Tractor PTO HP: 25 HP
• Blade Holder: Wing Pan
• Blades: 1/2" X 3" Uplift
• Blade Tip Speed: 14,307 fpm
• Tires: 14 1/2" Laminated
• Deflector Type: Front belt/Rear metal band standard; Front chains optional
• Approximate Weight: 600 lb.
• Gearbox Warranty: 10 Years

DESCRIPTION

Bush Hog® BH115 56 in. Deck, Single-Spindle Rotary Cutter.

The New BH110 Series picks up where the popular Razorback Series left off. Bush Hog®'s legendary durability and reliability is enhanced even further in the new light-duty BH110 Series. We've taken our quality to a new level in the BH110 Series by robotically welding the entire cutter. All welding is performed on the underside of the deck giving these cutters a clean, sleek appearance. All welds are applied at the same temperature, angle, and duration to ensure consistency from start to finish. Additional enhancements include a stronger gearbox stand & tailwheel caster fork, optional front chain shielding, and optional Cat. 1 Quick Hitch. The economically priced BH110 Series allows customers with lower horsepower compact tractors to take control of pesky weeds, grass, and small brush up to 1" in diameter while experiencing legendary Bush Hog® performance. As thousands of satisfied customers can attest, if it doesn't say Bush Hog®, it just won't cut it!

PERFORMANCE FEATURES

• Cutting Width of 56 inches
• 60 HP Gearbox Rating
• 2-11 inch Cutting Height

CONSTRUCTION FEATURES

• Tough 12 Gauge Deck Thickness
• Durable Laminated Tailwheels
• Cat. 1 3-Point Hitch
• Quick Hitch Compatible
• Available in Red, Orange, Blue, and Green

SAFETY FEATURES

• Front Rubber Belt
• Rear Metal Band
• Optional Front Chains

SPECIFICATIONS

• Cutting Width: 56"
• Cutting Height: 2"-11"
• Cutting Capacity: 1"
• Hitch Type: Cat 1 Std & QH compatible
• Deck Thickness: 12GA
• Sideband Thickness: 10GA
• Sideband Height: 8"
• Driveline: CAT 3
• Driveline Protection: Shearpin or Slip-Clutch
• Gearbox: 60 HP
• Tractor PTO Speed: 540 RPM
• Minimum Tractor PTO HP: 20 HP
• Blade Holder: Wing Pan
• Blades: 1/2" X 3" Uplift
• Blade Tip Speed: 15,472 fpm
• Tires: 14 1/2" Laminated
• Deflector Type: Front belt/Rear metal band standard; Front chains optional
• Approximate Weight: 500 lb.

Building on the success of the original BH210 Series, the New, Updated BH210-2 Series Rotary Cutters combine the legacy and reputation of Bush Hog's Single-Spindles with new, innovative design updates. These updated cutters now have full-length strongbacks designed to reinforce the entire length of the cutter, front to back, especially enhancing the rear half of the cutter and tailwheel structure. Reinforcement plates have been added to the bottom of the rear sidebands, providing extra strength in this critical area when backing into vegetation. Tall grass, pesky weeds, and small brush are no match for these authentic Bush Hog® built cutters. The BH210-2 Series Rotary Cutters are Made in America and designed to deliver superior performance in tough conditions, day after day, and year after year. Remember, "If it doesn't say Bush Hog, it just won't cut it."

PERFORMANCE FEATURES

• 72 inches Cutting Width
• Quick-Hitch Ready
• Gearbox Ratings of 65 HP
• Taller Sidebands for increased Cutting Volume and Efficiency
• Smooth-Top Deck for easy cleaning
• Custom Forged, 4" Wide Heat-Treated Blades

CONSTRUCTION FEATURES

• Continuously Welded Deck
• Full-Length 10ga Strongbacks
• Reinforcing plates added to rear sidebands
• Double-Braced Lower Hitch Lugs
• Formed and Fully-Welded Tailwheel Mount
• Puncture-Proof Laminated Tailwheels

SAFETY FEATURES

• PTO Shield
• Front Deflector
• Rear Metal Band
• Front Chains
• Rear Chains

SPECIFICATIONS

• Cutting Width: 72"
• Cutting Height: 2"-12"
• Cutting Capacity: 2"
• Hitch Type: Cat 1 Std & QH Ready; Cat 2 Std Compatible With Optional Bushings
• Deck Thickness: 10GA
• Sideband Thickness: 10GA
• Sideband Height: 11 1/2"
• Driveline: Cat 3
• Driveline Protection: 2-Plate Slip-clutch
• Gearbox: 65 HP
• Tractor PTO Speed: 540 RPM
• Minimum Tractor PTO HP: 30 HP
• Blade Holder: Oval
• Blades: 1/2" X 4" Uplift
• Blade Tip Speed: 14,963 fpm
• Tires: 15 1/2" Laminated
• Deflector Type: Rubber/Metal/Chains
• Approximate Weight: 840 lb.

Bush Hog CBX48

Features may include: Performance 48 and 60 inch working widths12 inch box depth for both models5/8 inch x 2 1/2 inch scarifier size4 and 5 scarifier teeth2 blades with reversible cutting edge for both modelsFor maximum of 24 PTO tractor HPQuick hitch compatibilityLower hitch position for smaller.

PERFORMANCE FEATURES

• 48 and 60 inch working widths
• 12 inch box depth for both models
• 5/8 inch x 2 1/2 inch scarifier size
• 4 and 5 scarifier teeth
• 2 blades with reversible cutting edge for both models
• For maximum of 24 PTO tractor HP
• Quick hitch compatibility
• Lower hitch position for smaller tractors

CONSTRUCTION FEATURES

• Heavy Duty A Frame
• Reversible Cutting Edge
• Powder Coat Paint

SPECIFICATIONS

MODELS

CBX48

CBX60

WORKING WIDTH

48 INCHES

60 INCHES

BOX DEPTH

12 INCHES

12 INCHES

SIDE END PLATE THICKNESS

3/16 INCHES

3/16 INCHES

SCARIFIER SIZE

5/8 INCHES X 2 1/2 INCHES

5/8 INCHES X 2 1/2 INCHES

NUMBER OF SCARIFIER TEETH

4 TEETH

5 TEETH

TYPE HITCH

ASAE CAT. I/QH

ASAE CAT. I/QH

CUTTING EDGE

REVERSIBLE

REVERSIBLE

NUMBER OF CUTTING EDGES

2 BLADES, BOLT ON REVERSIBLE CUTTING EDGE

2 BLADES, BOLT ON REVERSIBLE CUTTING EDGE

MAXIMUM TRACTOR HP

24 PTO

24 PTO

APPROXIMATE WEIGHT

248 LBS

258 LBS

WARRANTY

1 YEAR LIMITED WARRANTY

FEATURES

AVAILABLE IN MAJOR TRACTOR COLORS

Compact Road GradersMore tools to handle the landscaping chores of homeowners and compact tractor owners! Bush Hog now offers a light-duty, compact road graders that expand the work capabilities of your small, compact and subcompact tractors. Bush Hog is committed to providing you more reasons to get out of the house and go to work. The dirt around your house or workplace better look out! Things are going to be moving!

Compact Road Graders

More tools to handle the landscaping chores of homeowners and compact tractor owners”¦ Bush Hog now offers a light-duty, compact road graders that expand the work capabilities of your small, compact and subcompact tractors. Bush Hog is committed to providing you more reasons to get out of the house and go to work. The dirt around your house or workplace better look out”¦ things are going to be moving!

Features include:

Performance

• Adjustable and replaceable skid shoes

• 3/16 thick side panels

• Bolt on, replaceable and reversible blades

• Heat-treated Steel Blades

Specs

• Bush Hog® Compact Road Graders CRG48
• Manufacturer: Bush Hog®
  
• Model Name Compact Road Graders
• Trim Name CRG48
• Generic Type (Primary)Graders/Grading Scrapers
• PTO
• Required PTO Type2WD (Max): 24 HP | FWA (Max): 20 HP
• Dimensions
• Width, Working Position 48"
• Weights
• Weight 238 lbs
• Features
• Cutting Edge TypeTwo 3/8" x 6" bolt-on, replaceable and reversible heat-treated blades
• Hitch/TypeCat. 1 Std. and QH

DESCRIPTION

Bush Hog RG60 Road Grader.

Bush Hog Road Grader Blades fit a wide range of tractors. The Heavy-Duty, CAT I three-point hitch, 4 in. x 4 in. mainframe and double-lug lower hitch points help ensure performance and reliability. Shearing action of the material being worked is provided by two, reversible, high carbon steel cutting edges. One edge mounted inside the box and the other mounted on the back side allow the blade to be operated in forward or reverse. Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.

KEY FEATURES

• The Heavy-Duty, CAT I three-point hitch with 4 in. x 4 in. mainframe and double-lug lower hitch points.
• High quality Welds for Long lasting durability.
• Two, reversible, high carbon steel cutting edges. Skid Shoe Construction: 3/8 in. x 2-1/2 in. x 46-3/4 in. long.

PERFORMANCE FEATURES

• The Heavy-Duty, CAT I three-point hitch with a 4 in. x 4 in. mainframe and double-lug lower hitch points.
• Two, reversible, high carbon steel cutting edges. One inside and the mounted on the back side allow the blade to be operated in forward or reverse.
• Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.

SPECIFICATIONS

• Hitch: Cat. 1 Std and QH
• Working Width: 60"
• Weight: 500 lbs
• Side Panel Thickness: 3/16"
• Front Main Beam Construction: 4" X 4" X 5/16" Wall
• Rear Beam Construction: 2-1/2" X 2-1/2" X 3/16" Wall
• Skid Shoe Construction: 3/8" X 2-1/2" X 46-3/4" Long
• Scarifier Shanks: Three Position Shanks With Dimpled-on Hardened Tips
• Number of Scarifier Shanks: 4
• Cutting Edges: Two 1/2" X 6" Bolt-on, Replaceable and Reversible Heat-treated Blades

DESCRIPTION

Bush Hog RG72 Road Grader.

Bush Hog Road Grader Blades fit a wide range of tractors. The Heavy-Duty, CAT I three-point hitch, 4 in. x 4 in. mainframe and double-lug lower hitch points help ensure performance and reliability. Shearing action of the material being worked is provided by two, reversible, high carbon steel cutting edges. One edge mounted inside the box and the other mounted on the back side allow the blade to be operated in forward or reverse. Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.

KEY FEATURES

• The Heavy-Duty, CAT I three-point hitch with 4 in. x 4 in. mainframe and double-lug lower hitch points.
• High quality Welds for Long lasting durability.
• Two, reversible, high carbon steel cutting edges. Skid Shoe Construction: 3/8 in. x 2-1/2 in. x 46-3/4 in. long.

PERFORMANCE FEATURES

• The Heavy-Duty, CAT I three-point hitch with a 4 in. x 4 in. mainframe and double-lug lower hitch points.
• Two, reversible, high carbon steel cutting edges. One inside and the mounted on the back side allow the blade to be operated in forward or reverse.
• Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.

SPECIFICATIONS

• Hitch: Cat. 1 Std and QH
• Working Width: 72"
• Weight: 571 lbs
• Side Panel Thickness: 3/16"
• Front Main Beam Construction: 4" X 4" X 5/16" Wall
• Rear Beam Construction: 2-1/2" X 2-1/2" X 3/16" Wall
• Skid Shoe Construction: 3/8" X 2-1/2" X 46-3/4" Long
• Scarifier Shanks: Three Position Shanks With Dimpled-on Hardened Tips
• Number of Scarifier Shanks: 6
• Cutting Edges: Two 1/2" X 6" Bolt-on, Replaceable and Reversible Heat-treated Blades
  

• Features Bush Hog Road Grader Blades fit a wide range of tractors. The Heavy-Duty, CAT I three-point hitch, 4 in. x 4 in. mainframe and double-lug lower hitch points help ensure performance and reliability. Shearing action of the material being worked is provided by two, reversible, high carbon steel cutting edges. One edge mounted inside the box and the other mounted on the back side allow the blade to be operated in forward or reverse. Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in.
• Features may include: Performance The Heavy-Duty, CAT I three-point hitch 4 in. x 4 in. mainframe and double-lug lower hitch points Two, reversible, high carbon steel cutting edges. One inside and the mounted on the back side allow the blade to be operated in forward or reverse.
  
• Maximum penetration in hard-packed material is accomplished by the scarifier kit which has a maximum working depth of 3 in. Product The Heavy-Duty, CAT I three-point hitch with 4 in. x 4 in. mainframe and double-lug lower hitch points Two, reversible, high carbon steel cutting edges. Skid Shoe Construction: 3/8 in. x 2-1/2 in. x 46-3/4 in. long High quality Welds for Long lasting durability Specs Key Features 2019 Bush Hog RG Series RG84 Year2019 Manufacturer Bush Hog Model Name RG Series Trim NameRG84 Generic Type (Primary)Graders/Grading Scrapers PTO Required PTO Type Max (2WD.): 50 HP |Assist Max (FWA): 40 HP ChassisSkid Shoes: 3/8 in. x 2-1/2 in. x 46-3/4 in. long Beam4 in. x 4 in. x 5/16” wall | Rear Beam: 2-1/2 in. x 2-1/2 in. x 3/16 in. wall Hitch/TypeCat. 1 Std and QH Sidewalls3/16" Dimensions Width, Working Position84 in. Weights Weight642 lbs Features Cutting Edge TypeTwo 1/2 in. x 6 in. bolt-on, replaceable and reversible heat-treated blades Shank TypeScarifier: Three position shanks with dimpled-on hardened tips Scarifying Teeth Quantity.